 |
| Creep Testing Machines (5 sets) |
FEATURES |
| Here are 5 sets of creep testing machines for tensile, compressive or bending in vacuum, inert gas or open air. Creep deformation is measured by using special devised CCD camera and temperature is measured by thermocouple and infrared radiation thermometer. Loading capacity is 3 ton maximum. Heating elements are tungsten and MoSi, installed by Toshin Kogyo Company of Japan. |
MAIN SPECIFICATIONS
| Testing Capability | Tensile Creep Testing (round bar/flat speciman) Bending test at 3 point/4 point |
| Loading System | Vertical, Lever Type |
| Load Capacity | 3000kgf Max. (30kN) |
| Load Accuracy | plus&minus0.5% |
| Working Temperature | Room temp. -1600 centigrade in Air Room temp. -2000 centigrade in vacuum or Ar) |
| Heating Atmosphere | Vacuum, Inert gas, Atmospheric air |
| Vacuum Pressure | 0.13Pa |
| Heating Element | W, MoSi2, Graphite |
| Displacement Measuring | Non-contract Image Processing Analyzer Resolution 1um, Accuracy plus&minus 5 um |
| Temperature Measuring | Thermocouple (B,W Type), Infrared Radiation |
Copyright 1997-2005 Japan Ultra-high Temperature Materials Research Center/Research Institute